Requirements:
Configuration:
If not already done so, enter your dialing rules and location information in the telephone-/modem options (Windows Control Panel). Enter the connection information (IP-address, port, LAN-TAPI-password) in the LAN-TAPI-driver's settings.
On the PBX's menu check or otherwise change the LAN-TAPI-settings (IP-address, port, LAN-TAPI-password) according to the driver's settings.
Make sure that any necessary dongle licenses were purchased and also create a list of LAN-TAPI subscribers in the PBX's LAN-TAPI-settings.
Deactivate the RAS-service in your server's admintrative tools and reboot the machine. After the reboot restart the server's telephony service.
Test:
Run the Windows dialer and set the subscriber you want to test in the options.
Enter a destination number and dial.