Workaround for the COMfortel IP-DECT system
With firmware 2.53 the number of AM and AML licenses present in the COMfortel IP DECT system is checked. If no licenses or less licenses than handsets are active in the system, in rare cases an error message appears in the handsets after some time. In addition, this instruction saves the manual assignment of AM and AML licenses to the handsets in the DECT Manager.
You can remedy this with this workaround:
Please create a new template for COMfortel WS-500 in the phone system. Then click on Edit.
In the provisioning file, search for „<!—Enable AML for all connected handsets".
Change these parameters:
<param name="LocationAML" value="0"/>
<param name="MessagingAML" value="0"/>
In the PBX, assign the provisioning file to the DECT manager. Perform provisioning. Open the provisioning file again.
Now the tag must be commented out:
Please cut out „-->“ in the first line.
<!-- Enable AML for all connected handsets -->
<oper name="set_hs_aml" value="$(m5x0.ipui)">
<param name="LocationAML" value="0"/>
<param name="MessagingAML" value="0"/>
</oper>
And add at the end of the tag
<!-- Enable AML for all connected handsets
<oper name="set_hs_aml" value="$(m5x0.ipui)">
<param name="LocationAML" value="0"/>
<param name="MessagingAML" value="0"/>
</oper>
-->
Perform provisioning.
Subsequently, in the DECT Manager under
Settings -> Handsets
Edit the appropriate handsets and enable and save messaging:
Messaging -> Yes
Setting up the alarm-messaging or alarm-messaging-location function via provisioning