| Languages | Current version | ||
|---|---|---|---|
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Privacy Policy | V04 05/2025 | ||
| Open source licenses COMfortel D-400 / D-600 | 2.12A |
Performing an update
1. Save one of the following update server URLs under: Update > Update server URL.
2. Start the update.
More
You can find more information about the update in the Developer section.
General Information
Updated Privacy Policy at:Dashboard > Legal > Data protection.
Adaptations for the Energy Efficiency Directive (Regulation (EU) 2023/826)
Idle state modified in Power management function
Switch-on time for power management function has been limited to a maximum of 20 minutes (previously 30 minutes). Default value is now 5 minutes (no automatic setting yet).
Switching off the power management function via the web interface or provisioning is no longer supported, but is now only possible on the phone.
Security
Improved security and compatibility (TLS 1.3 enabled).
Note: If there are problems with registration on the COMpact PBXs, the PBX certificate and the root certificate may have to be recreated in the PBX.
Improvements
By using function keys, optical MWI signalling for multiple voice mailboxes can now also be achieved. Assignment of the function keys with the following new function:voice mailbox
The WireGuard app is now available out of the box and can be used to establish a VPN tunnel.Caution: A VPN tunnel must be re-established each time the network is disconnected.
Bug fixes
Several bug fixes
| Languages | Current version | ||
|---|---|---|---|
| Quick Guide | V01 12/2020 | ||
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Instructions | V03 05/2025 | ||
| Privacy Policy | V04 05/2025 | ||
| Advanced Information | V13 05/2025 | Online PDF | |
| V13 05/2025 | Online PDF | ||
| V13 05/2025 | Online PDF | ||
| Open source licenses COMfortel D-400 / D-600 | 2.12A |
General Information
Instructions for COMfortel D-600 from firmware version 2.4
Adaptations for the Energy Efficiency Directive (Regulation (EU) 2023/826)
Link to the help topic Detailed information on energy consumption
Editiorial changes
Links to D-series help with improved and comprehensive information.
Sorting/highlighting in safety instructions.
General Information
Changed descriptions
Note updated
New descriptions
Note on firmware version added
Note on the provisioning of a cloud PBX added
Several editiorial changes
General Information
Help/instructions for phones of the COMfortel D-Serie from firmware version 2.12
Adaptations for the Energy Efficiency Directive (Regulation (EU) 2023/826)
Idle state modified in Power management function
Detailed information on energy consumption
Changed descriptions
Update description added.
Information on the new firmware version 2.12
Function key description added.
Information on the IP address added.
App description added.
Several editiorial changes
Sorting/highlighting in safety instructions.
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
| Languages | Current version | ||
|---|---|---|---|
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Privacy Policy | V04 05/2025 | ||
| Open source licenses COMfortel D-400 / D-600 | 2.10A |
Performing an update
1. Save one of the following update server URLs under: Update > Update server URL.
2. Start the update.
More
You can find more information about the update in the Developer section.
Improvements
The silent ringtone now also appears as an icon in the status bar.
Information from the printed instructions included, also for accessories: About ...
Topics summarized, revised, linked: Functions and Applications / Using the Phone > Basic Knowledge
Update
Operating hours counter in the telephone: Settings > About phone
VPN status now also provided in the web interface: Dashboard
The function now also includes the option of starting a ‘silent’ alarm call to any telephone number.
uaCSTA support
Additional settings: Network > Topology > Compact SIP headers and No TCP for UDP
The arrow keys right/left of the directional pad can now be used to fast-forward and rewind a message by 5 seconds at a time during playback.
Various
| Languages | Current version | ||
|---|---|---|---|
| Quick Guide | V01 12/2020 | ||
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Instructions | V03 05/2025 | ||
| Privacy Policy | V04 05/2025 | ||
| Advanced Information | V12 07/2024 | Online PDF | |
| V12 07/2024 | Online PDF | ||
| V12 07/2024 | Online PDF | ||
| Open source licenses COMfortel D-400 / D-600 | 2.10A |
General Information
Instructions for COMfortel D-600 from firmware version 2.4
Adaptations for the Energy Efficiency Directive (Regulation (EU) 2023/826)
Link to the help topic Detailed information on energy consumption
Editiorial changes
Links to D-series help with improved and comprehensive information.
Sorting/highlighting in safety instructions.
General Information
Changed descriptions
Note updated
New descriptions
Note on firmware version added
Note on the provisioning of a cloud PBX added
Several editiorial changes
General information
Help/instructions for phones of the COMfortel D-Serie from firmware version 2.10
Information from the printed instructions included, also for accessories: About ...
New descriptions
Information summarised.
Changed descriptions
Information summarised and updated.
Information summarised and updated.
Information updated.
Information summarised and updated.
Information summarised and updated.
Default identity key added.
Information updated.
Information updated.
Settings added.
VPN status added.
Information updated.
Alarm call added.
Information summarised and updated.
Several editiorial changes
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
| Languages | Current version | ||
|---|---|---|---|
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Privacy Policy | V04 05/2025 | ||
| Open source licenses COMfortel D-400 / D-600 | 2.8D |
Important: After the update, the telephone may receive a new IP address from the DHCP server. Check the IP address here: Settings > Network > Current Settings
Performing an update
1. Save one of the following update server URLs under: Update > Update server URL.
2. Start the update.
More
You can find more information about the update in the Developer section.
Bug fixes
After the update to version 2.8C, telephony problems could occur under certain circumstances, as the telephones did not perform a DHCP request after the lease period had expired.
The login did not work under certain circumstances.
Only COMfortel D-100/110/200/210: After the update to version 2.8C, the dialling of multiple * and # was not possible without restrictions, as a menu for entering special characters was opened.
| Languages | Current version | ||
|---|---|---|---|
| Quick Guide | V01 12/2020 | ||
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Instructions | V03 05/2025 | ||
| Privacy Policy | V04 05/2025 | ||
| Advanced Information | V11 10/2023 | Online PDF | |
| V11 10/2023 | Online PDF | ||
| V11 10/2023 | Online PDF | ||
| Open source licenses COMfortel D-400 / D-600 | 2.8D |
General Information
Instructions for COMfortel D-600 from firmware version 2.4
Adaptations for the Energy Efficiency Directive (Regulation (EU) 2023/826)
Link to the help topic Detailed information on energy consumption
Editiorial changes
Links to D-series help with improved and comprehensive information.
Sorting/highlighting in safety instructions.
General Information
Changed descriptions
Note updated
New descriptions
Note on firmware version added
Note on the provisioning of a cloud PBX added
Several editiorial changes
General information
Help/instructions for phones of the COMfortel D-Serie from firmware version 2.8
New descriptions
Contains information on the new firmware version.
New functions for function keys.
New function.
New function.
New settings.
New options/information for setting up.
New function.
New function.
New setting options.
New options. Information summarised and updated.
Changed descriptions
New settings.
Updated information on NTP.
Information summarised and updated.
Setup paths for function keys for various functions added.
Information summarised and updated.
Information summarised and updated.
Information summarised and updated.
Information summarised and updated.
Update via USB storage medium added.
Several editiorial changes
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
| Languages | Current version | ||
|---|---|---|---|
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Privacy Policy | V04 05/2025 | ||
| Open source licenses COMfortel D-400 / D-600 | 2.8C |
Important: After the update, the telephone may receive a new IP address from the DHCP server. Check the IP address here: Settings > Network > Current Settings
Performing an update
1. Save one of the following update server URLs under: Update > Update server URL.
2. Start the update.
More
You can find more information about the update in the Developer section.
Bug fixes
After the update to version 2.8B, the information of an associated local contact was no longer displayed for an incoming call.
The WLAN connection was lost sporadically.
| Languages | Current version | ||
|---|---|---|---|
| Quick Guide | V01 12/2020 | ||
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Instructions | V03 05/2025 | ||
| Privacy Policy | V04 05/2025 | ||
| Advanced Information | V11 10/2023 | Online PDF | |
| V11 10/2023 | Online PDF | ||
| V11 10/2023 | Online PDF | ||
| Open source licenses COMfortel D-400 / D-600 | 2.8C |
General Information
Instructions for COMfortel D-600 from firmware version 2.4
Adaptations for the Energy Efficiency Directive (Regulation (EU) 2023/826)
Link to the help topic Detailed information on energy consumption
Editiorial changes
Links to D-series help with improved and comprehensive information.
Sorting/highlighting in safety instructions.
General Information
Changed descriptions
Note updated
New descriptions
Note on firmware version added
Note on the provisioning of a cloud PBX added
Several editiorial changes
General information
Help/instructions for phones of the COMfortel D-Serie from firmware version 2.8
New descriptions
Contains information on the new firmware version.
New functions for function keys.
New function.
New function.
New settings.
New options/information for setting up.
New function.
New function.
New setting options.
New options. Information summarised and updated.
Changed descriptions
New settings.
Updated information on NTP.
Information summarised and updated.
Setup paths for function keys for various functions added.
Information summarised and updated.
Information summarised and updated.
Information summarised and updated.
Information summarised and updated.
Update via USB storage medium added.
Several editiorial changes
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
| Languages | Current version | ||
|---|---|---|---|
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Privacy Policy | V04 05/2025 | ||
| Open source licenses COMfortel D-400 / D-600 | 2.8B |
Important: After the update, the telephone may receive a new IP address from the DHCP server. Check the IP address here: Settings > Network > Current Settings
Important: This firmware will only be made available at a later date via the update server URL https://update.auerswald.de.
Performing an update
1. Save one of the following update server URLs under: Update > Update server URL.
2. Start the update.
More
You can find more information about the update in the Developer section.
Bug fixes
After the update to version 2.8A, static IPv4 settings were ignored and the phone adopted the IPv4 settings supplied by the DHCP server.
| Languages | Current version | ||
|---|---|---|---|
| Quick Guide | V01 12/2020 | ||
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Instructions | V03 05/2025 | ||
| Privacy Policy | V04 05/2025 | ||
| Advanced Information | V11 10/2023 | Online PDF | |
| V11 10/2023 | Online PDF | ||
| V11 10/2023 | Online PDF | ||
| Open source licenses COMfortel D-400 / D-600 | 2.8B |
General Information
Instructions for COMfortel D-600 from firmware version 2.4
Adaptations for the Energy Efficiency Directive (Regulation (EU) 2023/826)
Link to the help topic Detailed information on energy consumption
Editiorial changes
Links to D-series help with improved and comprehensive information.
Sorting/highlighting in safety instructions.
General Information
Changed descriptions
Note updated
New descriptions
Note on firmware version added
Note on the provisioning of a cloud PBX added
Several editiorial changes
General information
Help/instructions for phones of the COMfortel D-Serie from firmware version 2.8
New descriptions
Contains information on the new firmware version.
New functions for function keys.
New function.
New function.
New settings.
New options/information for setting up.
New function.
New function.
New setting options.
New options. Information summarised and updated.
Changed descriptions
New settings.
Updated information on NTP.
Information summarised and updated.
Setup paths for function keys for various functions added.
Information summarised and updated.
Information summarised and updated.
Information summarised and updated.
Information summarised and updated.
Update via USB storage medium added.
Several editiorial changes
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
| Languages | Current version | ||
|---|---|---|---|
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Privacy Policy | V04 05/2025 | ||
| Open source licenses COMfortel D-400 / D-600 | 2.8A |
Important: After the update, the telephone may receive a new IP address from the DHCP server. Check the IP address here: Settings > Network > Current Settings
Important: This firmware will only be made available at a later date via the update server URL https://update.auerswald.de.
Performing an update
1. Save one of the following update server URLs under: Update > Update server URL.
2. Start the update.
More
You can find more information about the update in the Developer section.
General information
After the update, the telephone may receive a new IP address from the DHCP server. Check the IP address here: Settings > Network > Current Settings
Current Privacy Policy at:Dashboard > Legal > Data protection.
New functions
New functions are available for the function keys. These support the configuration of the phones as boss phone (silent ringing) and secretary phones (automatic opening of the pickup list).
New function key for initiating a call with subsequent DTMF sequence.
The phone now supports synchronisation with the contact data of a Google account.
The phone can now be put into a cleaning mode (function key/app) for cleaning without accidentally dialling or activating functions.
The COMfortel D-200/210/400/600 phones now support a firmware update via a USB storage medium (*.rom file in the root).
Improvements
Calls that have already been handled elsewhere can now be excluded from the call list:Telephony > Call history > Call completed elsewhere
The logging of calls can now be set depending on the type of call using the Alert Info:Telephony > Call history > Logging by call type
There has been an app update. If the app does not load any data after the update, clear the cache once: Via the phone Settings > Apps > Clear F-Droid cache and data
A wallpaper for the display can now also be assigned in the web interface:Display and LED > Wallpaper
The device settings are now summarised in the web interface. An image can easily be assigned to the device and thus also to the ME contact:Device settings > Edit image
Switching between multiple identities can now also be done using a single "Default Identity" function key. The identity can be automatically adjusted in all speed dialling keys. Setup only after importing the corresponding template. Further information is provided here: Auerswald DokuWiki
Various improvements.
NTP on/off setting removed. The NTP server should always be enabled, since the phone absolutely needs a current time.
A non-provided function key now also contains the target parameter.
A screenshot of the phone interface can now be created and saved for service purposes:Dashboard > Service data
All relevant service data can now be called up and saved for service purposes:Dashboard > Service data
Fixed SIP port setting removed. The SIP port is now variably based on the requirements of the network.
The phones are now able to play a received audio stream in hands-free mode:Telephony > Multicast
Scripts with existing parameters (e.g. send pings after setting the factory settings) are now displayed in the web interface and can be edited there:Scripts
Images can now be added to the alarm message via the XML browser.
Various improvements, e.g. in the Pickup, Presence area.
Page renamed as users are only used for login:User->Login
Setting renamed/unified:Subscription->Signal BLF
Bug fixes
Several bug fixes
| Languages | Current version | ||
|---|---|---|---|
| Quick Guide | V01 12/2020 | ||
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Instructions | V03 05/2025 | ||
| Privacy Policy | V04 05/2025 | ||
| Advanced Information | V11 10/2023 | Online PDF | |
| V11 10/2023 | Online PDF | ||
| V11 10/2023 | Online PDF | ||
| Open source licenses COMfortel D-400 / D-600 | 2.8A |
General Information
Instructions for COMfortel D-600 from firmware version 2.4
Adaptations for the Energy Efficiency Directive (Regulation (EU) 2023/826)
Link to the help topic Detailed information on energy consumption
Editiorial changes
Links to D-series help with improved and comprehensive information.
Sorting/highlighting in safety instructions.
General Information
Changed descriptions
Note updated
New descriptions
Note on firmware version added
Note on the provisioning of a cloud PBX added
Several editiorial changes
General information
Help/instructions for phones of the COMfortel D-Serie from firmware version 2.8
New descriptions
Contains information on the new firmware version.
New functions for function keys.
New function.
New function.
New settings.
New options/information for setting up.
New function.
New function.
New setting options.
New options. Information summarised and updated.
Changed descriptions
New settings.
Updated information on NTP.
Information summarised and updated.
Setup paths for function keys for various functions added.
Information summarised and updated.
Information summarised and updated.
Information summarised and updated.
Information summarised and updated.
Update via USB storage medium added.
Several editiorial changes
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
| Languages | Current version | ||
|---|---|---|---|
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Open source licenses COMfortel D-400 / D-600 | 2.6B | ||
| Privacy Policy | V04 05/2025 |
Performing an update
1. Save one of the following update server URLs under: Update > Update server URL.
2. Start the update.
More
You can find more information about the update in the Developer section.
Improvements
The handset sidetone can now be switched off for use in noisy environments.
Bug fixes
Various bug fixes in the areas of caller list, message display, relay and editing of function keys, among others.
| Languages | Current version | ||
|---|---|---|---|
| Quick Guide | V01 12/2020 | ||
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Instructions | V03 05/2025 | ||
| Advanced Information | V10 03/2023 | Online PDF | |
| V10 03/2023 | Online PDF | ||
| V10 03/2023 | Online PDF | ||
| Open source licenses COMfortel D-400 / D-600 | 2.6B | ||
| Privacy Policy | V04 05/2025 |
General Information
Instructions for COMfortel D-600 from firmware version 2.4
Adaptations for the Energy Efficiency Directive (Regulation (EU) 2023/826)
Link to the help topic Detailed information on energy consumption
Editiorial changes
Links to D-series help with improved and comprehensive information.
Sorting/highlighting in safety instructions.
General Information
Changed descriptions
Note updated
New descriptions
Note on firmware version added
Note on the provisioning of a cloud PBX added
Several editiorial changes
General Information
Help/instructions for phones of the COMfortel D-Serie from firmware version 2.6
New descriptions
Contains information on the new firmware version
New function
New function
New function
New function
Changed descriptions
If no interaction with the message is intended, pressing the message key again makes the view disappear.
The following functions have been added:Pickup-choice on key-press, Do not show in pickup list, Pickup of connected calls, Pickup list auto. opening, Play pickup tone, App Pickup.
As soon as the voicemail app has been successfully put into operation, voicemails are automatically opened in the app when called up via the notification. The behaviour has changed within the menus Voicemails, Faxes.
When configuration switchover is enabled in the PBX, the LED of the function key lights up green.
Date and time of the phone are displayed in the web interface.
Re-registration can be triggered at an earlier time than set in the register interval per Early re-register (sec), Refresh register at 1/2.
Support of USB mass storage devices, primarily for loading images.
Removed descriptions
Reverse search
Send SIP REGISTER
Several editiorial changes
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
| Languages | Current version | ||
|---|---|---|---|
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Open source licenses COMfortel D-1x0 / D-2x0 | 2.6A | ||
| Privacy Policy | V04 05/2025 |
Performing an update
1. Save one of the following update server URLs under: Update > Update server URL.
2. Start the update.
More
You can find more information about the update in the Developer section.
General Information
With Release 2.6, the following setting is omitted: Send SIP REGISTER.
New Functions
Different name sources can be prioritised in a list per Identity. The prioritisation is used to decide which name is shown in the display for incoming/outgoing calls. The following parameter is therefore redundant and has been removed: Reverse search.
The Pickup function has been extended by the following settings: Pickup-choice on key-press, Do not show in pickup list, Pickup of connected calls, App Pickup. For the device variants COMfortel D-400 / D-600 additionally Pickup list auto. opening, Play pickup tone.
The phone can send and receive SIP messages. A set message can be sent to a recipient with an appropriately configured function key. A received SIP message is displayed as a notification.
When configuration switchover is enabled in the PBX, the LED of the function key lights up green.
Date and time of the phone are displayed in the web interface.
Re-registration can be triggered at an earlier time than set in the register interval per Early re-register (sec), Refresh register at 1/2.
Improvements
Pressing the message key displays the messages. If no interaction with the message is intended, pressing the message key again makes the view disappear.
By provisioning the dialling tone in the Identities section, it is possible to play different dialling tones to the user: Depending on whether the user is still within the PBX or already in the public network.
As soon as the voicemail app has been successfully put into operation, voicemails are automatically opened in the app when called up via the notification. The behaviour has changed within the menus Voicemails, Faxes.
Support of USB mass storage devices, primarily for loading images.
Various methods are available for transmitting DTMF signals.
| Languages | Current version | ||
|---|---|---|---|
| Quick Guide | V01 12/2020 | ||
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Instructions | V03 05/2025 | ||
| Advanced Information | V10 03/2023 | Online PDF | |
| V10 03/2023 | Online PDF | ||
| V10 03/2023 | Online PDF | ||
| Open source licenses COMfortel D-1x0 / D-2x0 | 2.6A | ||
| Privacy Policy | V04 05/2025 |
General Information
Instructions for COMfortel D-600 from firmware version 2.4
Adaptations for the Energy Efficiency Directive (Regulation (EU) 2023/826)
Link to the help topic Detailed information on energy consumption
Editiorial changes
Links to D-series help with improved and comprehensive information.
Sorting/highlighting in safety instructions.
General Information
Changed descriptions
Note updated
New descriptions
Note on firmware version added
Note on the provisioning of a cloud PBX added
Several editiorial changes
General Information
Help/instructions for phones of the COMfortel D-Serie from firmware version 2.6
New descriptions
Contains information on the new firmware version
New function
New function
New function
New function
Changed descriptions
If no interaction with the message is intended, pressing the message key again makes the view disappear.
The following functions have been added:Pickup-choice on key-press, Do not show in pickup list, Pickup of connected calls, Pickup list auto. opening, Play pickup tone, App Pickup.
As soon as the voicemail app has been successfully put into operation, voicemails are automatically opened in the app when called up via the notification. The behaviour has changed within the menus Voicemails, Faxes.
When configuration switchover is enabled in the PBX, the LED of the function key lights up green.
Date and time of the phone are displayed in the web interface.
Re-registration can be triggered at an earlier time than set in the register interval per Early re-register (sec), Refresh register at 1/2.
Support of USB mass storage devices, primarily for loading images.
Removed descriptions
Reverse search
Send SIP REGISTER
Several editiorial changes
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
| Languages | Current version | ||
|---|---|---|---|
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Open source licenses COMfortel D-400 / D-600 | 2.4B | ||
| Privacy Policy | V04 05/2025 |
Caution: The parameter »cipher« has a changed meaning after the update to OpenVPN 2.6 and is no longer supported. If necessary, adjustments in frequently used configurations are necessary in this regard.
Performing an update
1. Save one of the following update server URLs under: Update > Update server URL.
2. Start the update.
More
You can find more information about the update in the Developer section.
General Information
Important: Support for the xml description for function keys will be discontinued in a future release. Please migrate your function keys to the Lua format.
New Functions
When this function is switched off, incoming and outgoing calls are saved in the Call history.
After picking up the receiver or putting it down, a predefined phone number is called after a predefined time.
If an image has been assigned to a speed dialling key, this picture is also displayed during simplified forwarding in the active call.
Pressing a configured emergency call button on the device sends an alert in the form of a silent notification to other users.
From Release 2.4, the use of USB headsets is supported.
The Voicemail App is now supported for the device variants COMfortel D-400/D-600 in connection with Auerswald PBXs (support for COMtrexx from Release 1.8.0). The app allows you to organise fax messages and voicemails conveniently. Users of a provisioning PBX do not need to enter any credentials. The app is self-provisioning.
The online help can now be accessed and searched directly in the web interface.
Images from the SIP header are displayed for both incoming and outgoing calls.
Improvements
Caution: The parameter »cipher« has a changed meaning after the update to OpenVPN 2.6 and is no longer supported. If necessary, adjustments in frequently used configurations are necessary in this regard.
If the boot process into the updater fails, the reason for the standstill is now displayed.
The administrator can display or hide menu options. The display no longer exclusively affects the phone, but now also affects the user's authorisation level and how menu options are displayed on the web interface.
In the 2nd line of a configured speed dialling key, the stored phone number is now displayed again.
Terms used until nowRepeat subscription/Repeat register modified in Retry subscriptions/Retry register. This makes it clear that these are settings for the event of an error.
During the display of webcam images in standby mode, the switchover to the dialling window takes place automatically while dialling a number; there is no need to press the Home key.
Bug fixes
After the firmware update to version 2.2A, network dropouts occurred due to a problem with the IPv4 configuration (static, DHCP).
| Languages | Current version | ||
|---|---|---|---|
| Quick Guide | V01 12/2020 | ||
| End User License Agreement for Software (EULA) | V04 12/2022 | ||
| Open source licenses COMfortel D-400 / D-600 | 2.4B | ||
| Advanced Information | V09 11/2022 | Online PDF | |
| V09 11/2022 | Online PDF | ||
| V09 11/2022 | Online PDF | ||
| Instructions | V03 05/2025 | ||
| Privacy Policy | V04 05/2025 |
General Information
Help/instructions for phones of the COMfortel D-Serie from firmware version 2.4
New descriptions
Contains information on the new firmware version
New function
New function
New function
New function
If a key to which a function has not been assigned is pressed for a longer time (long press), the menu for configuring the selected key opens automatically.
Description and illustration of incoming calls on devices of COMfortel D-Series
Changed descriptions
New entry:Silent Alert
USB headsets added
Icon added for function Silent Alert
Trouble-free operation after provisioning by a cloud PBX
Display of error messages in the event of a failed boot process in the updater
Repeat subscription modified in Retry subscriptions
Repeat register modified in Retry register
Integration of video tutorials on specific topics.
Targeted positioning of links to selected topics in the Dokuwiki.
Removed descriptions
Information on the use of protocols (IPv4/IPv6)
Several editiorial changes
General Information
Instructions for COMfortel D-600 from firmware version 2.4
Adaptations for the Energy Efficiency Directive (Regulation (EU) 2023/826)
Link to the help topic Detailed information on energy consumption
Editiorial changes
Links to D-series help with improved and comprehensive information.
Sorting/highlighting in safety instructions.
General Information
Changed descriptions
Note updated
New descriptions
Note on firmware version added
Note on the provisioning of a cloud PBX added
Several editiorial changes
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
| Languages | Current version | ||
|---|---|---|---|
| End User License Agreement for Software (EULA) | V03 05/2021 | ||
| Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 2.2B | ||
| Privacy Policy | V04 05/2025 |
The update is carried out via the address https://update.auerswald.de.
This address must be entered on the phone under Menu -> Settings -> Firmware update -> Update server URL.
Further information about the update process can be found in the Auerswald Developer
On the COMfortel D-100/D-200 device types, in some cases the status message displayed during provisioning did not disappear after the process was finished.
Calling up the central caller list led to display problems with partly limited operability of the phone.
After the firmware update to version 2.2A, an incorrect BLF display of the group status occurred. A busy group number was not signalled as busy (lit red).
After multiple logins/logouts to a COMtrexx, names were not correctly updated in the display.
After the firmware update to version 2.2A, there was an incorrect display of the key LED and limited functionality in the speed dialling keys with call numbers to external area.
After the firmware update to version 2.2A, network interruptions occurred due to a problem with the IPv4 configuration (static, DHCP).
| Languages | Current version | ||
|---|---|---|---|
| Instructions | V01 12/2020 | ||
| Quick Guide | V01 12/2020 | ||
| End User License Agreement for Software (EULA) | V03 05/2021 | ||
| Advanced Information | V08 05/2022 | Online PDF | |
| V08 05/2022 | Online PDF | ||
| V08 05/2022 | Online PDF | ||
| Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 2.2B | ||
| Privacy Policy | V04 05/2025 |
Floating user licence replaces Concurrent User License
Help/Instructions for phones of the COMfortel D-Serie from firmware version 2.2
Contains information about the new firmware version
New function
The function key icons can be displayed or hidden on the COMfortel D-XT20(i) key extension modules.
New function
New function
Changed description
New function
Gesture control can be used to switch between two different views.
Extended function
The entries have been added:Bluetooth,Relays,Park position, Status displayflashing yellow/shining yellow.
The entry for the LDAP server's default port has been adjusted.
Note on phone behaviour during an update/backup
New icons:Exchange Line,Group
Example added
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
| Languages | Current version | ||
|---|---|---|---|
| End User License Agreement for Software (EULA) | V03 05/2021 | ||
| Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 2.2A | ||
| Privacy Policy | V04 05/2025 |
The update is carried out via the address https://update.auerswald.de.
This address must be entered on the phone under Menu -> Settings -> Firmware update -> Update server URL.
Further information about the update process can be found in the Auerswald Developer
Depending on the scenario, the 2nd line in the label of the speed dialling key contains different information, such as e.g. setup errors, the current call status or name/phone number of the other party if available and much more.
The function key icons can be shown or hidden for COMfortel D-XT20(i) key extension modules: Web interface > Display and LED > Show icons on D-XT20(i)Phone > Settings > Display and LED > Show icons on D-XT20(i)
For a potential service case, information is now displayed as to which network chip was installed in the phone: Web interface > Dashboard > Network chip,Phone > Settings > About phone > Network chip/
If a phone can be reached in the network, an LLDP packet with MED class 3 information is sent when the LLDP function is switched on and after the preset time interval has expired. Can be set in the following places: Web interface > Network > Topology > Basic Network SettingsPhone > Settings > Network > Topology
A call can be parked in a position and resumed using the parking position key.
An example has been added for setting up call bindings on a FRITZ!box.
The LED display of the speed dialling key has been expanded to include the status flashing yellow (establishing a subscription) and glowing yellow (error).
For easy navigation, the list of possible function keys now appears in alphabetical order.
A configured camera can be set as wallpaper for the idle screen. Gesture control can be used to switch between two different views: standard view on the left, view without widgets on the right: Phone > Settings > Display and LED > Camera as wallpaper
Admins have to change the password at the initial login. The old password must no longer be entered.
After an update, the phone may appear usable even though the settings migration is not yet complete. To inform the user of this fact, a blocking message now appears: Data conversion, process can take several minutes.
For the call types Exchange Line and Group a corresponding icon is now displayed.
Access: Menu items can be shown/hidden by the administrator. The display no longer only affects the phone, but also the display of menu items in the web interface for the authorisation level User.
Previously, the image of the ME contact was only displayed on the idle screen if it was encoded according to the Base64 standard. It is now possible to specify an external URL.
So far, the display name, as assigned under identities, was sent with a call. Now a prioritised selection is made:
1. Primary user name (can be provisioned) 2. Display name as assigned under Identities 3. Device name 4. No display if none of the listed information is available
Information on this has been added under Using the Phone > Basic Knowledge > Display > Display overview > Varying display names.
The UI Texts between the different interfaces have been aligned: Web interface > Display and LED,Web interface > Cameras,Web interface > Sound
Only LDAPS is used by default. The specification for the default port of the LDAP server has been adjusted accordingly and an overview of possible ports for various LDAP protocols has been added.
Certain requests (reboot, check-cfg) via Notify were only executed if the request was sent by the registrar and the registrar was saved as an IP address or the IP address was in the SIP provisioning release list. Now requests are also executed if they come from the registrar or outbound proxy, regardless of the saved format.
| Languages | Current version | ||
|---|---|---|---|
| Instructions | V01 12/2020 | ||
| Quick Guide | V01 12/2020 | ||
| End User License Agreement for Software (EULA) | V03 05/2021 | ||
| Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 2.2A | ||
| Advanced Information | V08 05/2022 | Online PDF | |
| V08 05/2022 | Online PDF | ||
| V08 05/2022 | Online PDF | ||
| Privacy Policy | V04 05/2025 |
Floating user licence replaces Concurrent User License
Help/Instructions for phones of the COMfortel D-Serie from firmware version 2.2
Contains information about the new firmware version
New function
The function key icons can be displayed or hidden on the COMfortel D-XT20(i) key extension modules.
New function
New function
Changed description
New function
Gesture control can be used to switch between two different views.
Extended function
The entries have been added:Bluetooth,Relays,Park position, Status displayflashing yellow/shining yellow.
The entry for the LDAP server's default port has been adjusted.
Note on phone behaviour during an update/backup
New icons:Exchange Line,Group
Example added
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
| Languages | Current version | ||
|---|---|---|---|
| End User License Agreement for Software (EULA) | V03 05/2021 | ||
| Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 2.0C | ||
| Privacy Policy | V04 05/2025 |
The update is carried out via the address https://update.auerswald.de.
This address must be entered on the phone under Menu -> Settings -> Firmware update -> Update server URL.
Further information about the update process can be found in the Auerswald Developer
A provisioning error caused dropouts in the outgoing audio channel during the call in connection with FW 8.2B-002. Now the error has been resolved.
Device inertia and audio issues were experienced due to memory losses associated with BLF. Now these errors have been resolved.
Pending re-registration attemps due to timing errors in the phone could lead to the error message "503 Broken pipe" after an update or restart of the PBX. The phones now register themselves stably when the Pbx is restarted.
When configuring speed dialling keys via the web interface, the displaying of assigned function keys was briefly interrupted after saving. Now the error has been resolved.
When do-not-disturb was enabled, the LED on the function key did not light up red as excepted after logging into the PBX, but in yellow. Now the error has been resolved.
In the case of function keys for speed dialling an PBX templates, a time set too short for the re-subscribe led to a high load. Now the error is fixed by using the expire time defined in the configuration.
During the boot process or the initilisation of Lua keys, there were sporadic errors when executing the initial code. Now the error has been resolved.
Display errors and crashes occurred when importing configurations with the maximum number of Lua speed dialling keys. Now this bug is fixed by working on the Lua managers.
While holding and calling another call partner, unwanted audio effects occurred during the first two to three ring tones. Now this behaviour is fixed.
The volume control was changed with the firmware update to version 2.0. This change caused the volume for hands-free calling and ringing to be too low. Now the volume control has been adjusted.
After the firmware update to version 2.0A, the COMfortel D-series devices sporadically had audio problems. Now these problems are solved.
After a firmware update to version 2.0B, sporadically quiet calls occurred. Now this behaviour is fixed.
| Languages | Current version | ||
|---|---|---|---|
| Instructions | V01 12/2020 | ||
| Quick Guide | V01 12/2020 | ||
| End User License Agreement for Software (EULA) | V03 05/2021 | ||
| Advanced Information | V07 12/2021 | Online PDF | |
| V07 12/2021 | Online PDF | ||
| V07 12/2021 | Online PDF | ||
| Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 2.0C | ||
| Privacy Policy | V04 05/2025 |
Floating user licence replaces Concurrent User License
Help/instructions for phones of the COMfortel D-Serie from firmware version 2.0
Contains information about the new firmware version
New function.
Play popup notification sound: New setting for the configuration.
New function.
Beep when connecting: New setting for the configuration.
Interrupt active calls: New setting for the configuration.
New function.
New function.
New parameter InterCom.
New settings for register and subscription.
New status bars.
Note on possible hazards.
Note on paired devices.
Note for handling after a firmware update.
Extended function.
Extended function.
Extended function.
ICE: New setting for the configuration.
Data is not sent but received.
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
| Languages | Current version | ||
|---|---|---|---|
| End User License Agreement for Software (EULA) | V03 05/2021 | ||
| Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 2.0B | ||
| Privacy Policy | V04 05/2025 |
The update is carried out via the address https://update.auerswald.de.
This address must be entered on the phone under Menu -> Settings -> Firmware update -> Update server URL.
Further information about the update process can be found in the Auerswald Developer
The following settings have been moved from Identities to Network > Topology:
The parameters for SIP NAT Traversal have been grouped. The Use ICE function has been implemented.
The descriptions of particular events can be displayed as popup messages.
New settings:
Used to restrict the phone's configuration by assigning user roles.
For configuring user accounts manually.
Record network event logs if the phone malfunctions.
If there is an error: Sets the interval for registration attempts or for establishing a subscription on the PBX/provider.
Status displays also provided in the web interface.
Automatic answer is now called Automatic call acceptance.
Realm is now called SIP domain.
Displays exchange lines/groups (COMmander/COMpact from FW 8.2A, COMtrexx at a later date)
Due to an error in the SIP provisioning, the PBX could not trigger the provisioning of the phone. Now the error has now been resolved.
The CSV import of PBX contacts with more than 32 characters and the resulting invalid display names led to phone crashes. Now parse errors no longer lead to crashes.
Thanks to improved subscription management, crashes in the phone could be resolved.
After the firmware update to version 2.0A, the COMfortel D-series devices sporadically had audio problems. Now these problems are solved.
If the attempt to put a call on hold was rejected by the PBX, it still appeared as a call on hold in the display. Now the message Hold unsuccessful appears and the call is displayed normally.
| Languages | Current version | ||
|---|---|---|---|
| Instructions | V01 12/2020 | ||
| Quick Guide | V01 12/2020 | ||
| End User License Agreement for Software (EULA) | V03 05/2021 | ||
| Advanced Information | V07 12/2021 | Online PDF | |
| V07 12/2021 | Online PDF | ||
| V07 12/2021 | Online PDF | ||
| Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 2.0B | ||
| Privacy Policy | V04 05/2025 |
Floating user licence replaces Concurrent User License
Help/instructions for phones of the COMfortel D-Serie from firmware version 2.0
Contains information about the new firmware version
New function.
Play popup notification sound: New setting for the configuration.
New function.
Beep when connecting: New setting for the configuration.
Interrupt active calls: New setting for the configuration.
New function.
New function.
New parameter InterCom.
New settings for register and subscription.
New status bars.
Note on possible hazards.
Note on paired devices.
Note for handling after a firmware update.
Extended function.
Extended function.
Extended function.
ICE: New setting for the configuration.
Data is not sent but received.
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
| Languages | Current version | ||
|---|---|---|---|
| End User License Agreement for Software (EULA) | V03 05/2021 | ||
| Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 1.10A | ||
| Privacy Policy | V04 05/2025 |
The update is carried out via the address https://update.auerswald.de.
This address must be entered on the phone under Menu -> Settings -> Firmware update -> Update server URL.
Further information about the update process can be found in the Auerswald Developer
You find further information about functions or configuration in the Advanced Information/online help. In this chapter, features/improvements and bug-fixes for this version are described.
| Languages | Current version | ||
|---|---|---|---|
| Instructions | V01 12/2020 | ||
| Quick Guide | V01 12/2020 | ||
| End User License Agreement for Software (EULA) | V03 05/2021 | ||
| Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 1.10A | ||
| Advanced Information | V06 05/2021 | Online PDF | |
| V06 05/2021 | Online PDF | ||
| V06 05/2021 | Online PDF | ||
| Privacy Policy | V04 05/2025 |
Floating user licence replaces Concurrent User License
Display and LED: Note removed
Device Information: Description for new function added
Gesture control: Description added
Wallpaper: Description for new function added
Contacts: Description for new function added
LDAP: Description for new function added
Roaming User : Description for new function added
Central caller list: Description for new function added
Display > LED notifications > Message key LED: Description for new function added
Function keys > Edit parameters: Description for new function added
Using provisioning > Schedule > Time: Note added
LDAP > LDAP filter > Name format: Description for new option added
Ringtones > Ringtones by call type: Figure adjusted to new web interface
Ringtones > Ringtone management: Description for new functions added
Basic Knowledge > Display > Notifications: Icon added
Gallery: Description for new function added
Settings > Display and LED > Message key LED: Description for new function added
Settings > Display and LED > Reset Wallpaper: Description for new function added
Settings > Network > Current Settings: Description added
Settings > Function keys > Edit parameters: Description for new function added
Settings > LDAP > LDAP filter > Name format: Description for new option added
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
| Languages | Current version | ||
|---|---|---|---|
| End User License Agreement for Software (EULA) | V02 10/2020 | ||
| Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 1.8C | ||
| Privacy Policy | V04 05/2025 |
The update is carried out via the address https://update.auerswald.de.
This address must be entered on the phone under Menu -> Settings -> Firmware update -> Update server URL.
Further information about the update process can be found in the Auerswald Developer
| Languages | Current version | ||
|---|---|---|---|
| End User License Agreement for Software (EULA) | V02 10/2020 | ||
| Instructions | V01 12/2020 | ||
| Quick Guide | V01 12/2020 | ||
| Advanced Information | V05 01/2021 | Online PDF | |
| V05 01/2021 | Online PDF | ||
| V05 01/2021 | Online PDF | ||
| Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 1.8C | ||
| Privacy Policy | V04 05/2025 |
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel WS-500M
COMfortel WS-500S
For the following firmware:
TK systems: from 7.8C
D series: from 1.8A
COMfortel-IP: from 2.8G
COMfortel-M/WS: from 2.36
For the following products:
For the following firmware:
Language: