Support

Improvements

Backup and restore

Clear error messages in the event of a non-functioning backup.

Service data

Prevention of unnecessary notifications.

Bug fixes

E-mail transfer

Data from deleted outgoing mail servers may still have been used.

Holidays

When a new public holiday was created, an additional public holiday was always created on the following day.

FONtevo

Misleading error message when commissioning FONtevo phones on COMtrexx Next.

MWI

Signalling on DECT handsets did not work if several telephones were assigned to the user.

PBX Call Assist

In the call list of the PBX Call Assist, the internal user number was displayed instead of the dialled external number in the event of unsuccessful calls.

Key functions

Only COMtrexx Flex: The factory settings could not be restored with the key function.

Voice mail and fax boxes

Onky COMtrexx Business: After updating to version 2.2.1, an unused USB stick led to non-functioning voice mail and fax boxes. The USB stick is now ignored again.

Music on hold

After announcement before answering, music on hold was played during the call phase, even if the function was switched off.

Web interface

Administration > Network > Server service > SFTP server: Superfluous settings removed.

• Downloads
• Notes

General information

COMtrexx Flex

New hardware variant COMtrexx Flex available for up to 250 users.

Improvements

Change of term

Proxy server for COMfortel SoftPhonerenamed toProxy server for Online services.

Various texts in the COMtrexx Control Center environment.

E-mail transfer

Emails could not be sent if the sender's email address did not match the server. Now any e-mail address is accepted if only one outgoing mail server has been set up. If you set up more than one outgoing mail server, the domains of the senders must match the addresses of the associated outgoing mail servers in order for emails to be sent (e.g. emailcomtrexx@web.de with smtp.web.de).

Bug Fixes

InterCom

The automatic termination of an InterCom connection only worked on the initiating telephone, but not on the InterCom destination.

Provisioning

Auto-provisioning (zero-touch) of Snom phones was no longer possible.

Status display Presence

The status of redirected users may not have been displayed correctly.

Voice mail and fax boxes

Boxes deleted via the web interface were not deleted correctly and were displayed again after a restart.

• Downloads
• Notes

General information

COMtrexx Next

New hardware variant COMtrexx Next available for small expansion stages up to 40 users.

Security

Communications

Improved security and compatibility (activation of TLS 1.3 for SIP and WEB, removal of TLS 1 and 1.1).

New functions

Remote configuration via Auerswald remote access (ARA) server

With version 2.2 of the COMtrexx Control Center, remote configuration can be initiated via the Auerswald Remote Access (ARA) Server in future.

Network interface (second)

It is now possible to set up a second network interface in the PBX under the following conditions.

• Upgrade with a NET-Modul (only COMtrexx Business)
• Installation of a second network adapter/card (only COMtrexx VM)

Improvements

E-mail transfer

Improved e-mail dispatch with new SMTP server. Emails can now also be sent via Microsoft 365. Emails can now also be sent via Microsoft 365.

Device properties

It is now possible to specify for IP devices which IP protocol is to be used by the device for the connection to the COMtrexx.

Online Help

All information on hardware and VM variants is now also available in the online help.

Provisioning

d-series_template.xml: To prevent repeated attempts to subscribe to a voicemail box after logging out (roaming user), a subscription failure handling function has been added to the COMfortel d-series phone template for the identity. In individually created provisioning files, this change must be transferred manually.
<subscriptionFailureHandling>...</subscriptionFailureHandling>

Transfer configuration

A configuration can now be transferred from one variant to a specific other variant.

Bug Fixes

Analogue fax machine

With some providers it was not possible to send fax messages in the local phone network.

Note: : If an analogue telephone and a user instead of an external device fax were temporarily configured as a workaround, this must be reversed.

Logging into the Web Interface

Only applies to version 2.2.0 COMtrexx Next: After deleting all contacts, it was no longer possible to log in.

LDAP

If automatic exchange line request was switched off, the 0 for exchange line request was not transferred to the contacts. External calls initiated via the contacts failed. LDAP now checks the automatic exchange line request when a call number is requested. If the telephone number to be supplied has more than 4 digits, it is regarded as external and preceded by an exchange line access number.

Note: For the few exceptions where telephone numbers with less than 5 digits are external, these must be entered with the local area code.

If automatic exchange line request was switched off, no internal phone numbers/contacts were displayed for newly created users.

An unnecessary empty contact Admin was displayed in the COMfortel D-series phone.

LDAP / Voicemail App

If automatic exchange line request was switched off, the callback via the voicemail app did not work on a COMfortel D-series phone.

NAT traversal

The public IP address was also sent in the header, even if the option was switched off.

Presence

After logging out (roaming user), a COMfortel D-series phone was still displayed as available.

Call forwarding

External call forwarding was always carried out via accounts at the system location and sometimes failed. The account associated with the redirected number is now used.

Web interface

Functions > Time control > Switching times: The number of possible switching times was not displayed correctly.

• Downloads
• Notes