Soutien

Improvements

AML / MQTT

If the alarm cannot reach the handset, an MQTT response is now sent.

With COMfortel M-710/730 handset from firmware 13.04: To send an MQTT message to a configured MQTT server, short and long press are now supported on the COMfortel M-710/730 handset.
Note: The handset simply sends an MQTT message. If the server does not respond, the handset has no knowledge of it and will neither inform the user nor resend the message.

Login web interface

Up to 30 login accounts with the roles Admin or User can now be set up to log in to the web interface: Settings > System > Web configurator > Additional WebUI accounts

Mobile devices

Handset settings can now be changed for multiple handsets at the same time: Settings > Mobile devices > Administration > Edit

Handsets can now be searched and sorted based on firmware versions: Settings > Mobile devices > Administration > FW

The SIP account name source can now be selected on the handset display.

Certificates

Details of client certificates can now be displayed in the web interface: Settings > System > Security > Accept all certificates: No > Client certificates > Details

R700H protect PRO

The R700H protect PRO from Gigaset is now fully supported.

Bug fixes

AML / MQTT

Handsets in the alarm group did not receive a message if a handset was not registered to DECT.

• Téléchargements

General Information

Initial installation of a virtual integrator requires an activation code.

Improvements

Secure provisioning with new client certificates. Requirements: COMtrexx from version 2.4.4 or COMmander/COMpact from version 8.6B.

Calls with URI are now saved properly as missed and outgoing calls.

GAP handset: The ‘ready to dial’ tone for outgoing calls is now played immediately after off-hook.

Bug fixes

Under certain circumstances, SIP connections/calls could be lost (error ‘sip-control terminated’).

DTMF RFC2833: Duplication of the codec list led to wrong payload type.

Power outages led to an unusable system.

Reverse look-up was not done for transferred calls.

• Téléchargements

Improvements

Secure Firmware update with client certificates: The existing SHA1 factory client certificate is used. This was disabled in software 2.57.

Codec G.729 – Information about Annex B added

Restoring the registration after SBC maintenance

New configuration parameter in web interface: Display diversion header option on/off

Unsecure WEB-UI Cipher Suites removed

LDAP provisioning parameter: "ObjectClass" removed

Regular restarts can now be configured via provisioning

Setting up the automatic firmware update via provisioning

Switching off the web interface via provisioning now does not require the base to be restarted

Bug fixes

DECT Manager restarted after an anonymous call with the error ‘sip-control terminated’

No audio during calls - "Could not find MediaIdx" error

No reverse lookup in handset phone-book when Diversion header present

Provisioning: When 1 of the TrunkName parameter in oper is empty, no trunks are created at all

MQTT bsStatus response does not contain the name

• Téléchargements

New functions

Automatic online firmware update via web configurator with link to release notes.

Improvements

EPOS/Sennheiser GAP Headsets now supported.

Upgrade open SSL from version 1.1.1 to version 3.0.

• SHA1/MD5 based certificates are deprecated (Except for existing factory provisioning certificate).
• Block possibility of adding certs with SHA1 or MD5 based signatures.

Embedded Integrator reset option via web configurator offers more roles.

Syslog and user change time stamp now contain year by default.

After DECT system software update, the Handset DECT (PNCAP) functionality is refreshed.

DNS SRV failover handling improved, after DNS renewal Register requests are sent to primary server.

Central Phonebook

• Enabled again
• Network access closed when not used
• „Refresh now“ button in web configurator
• Add "search anywhere in name" option in web configurator.

Multiple PBX redundancy by moved permanently or temporarily.

Access code special treatment configured via web configurator.

Migration to line-ID based ringing (and other future features) by automatic PNCAP.

Registration after firmware update with all registered and whitelisted handsets.

Web configurator

• Show reason why upload license file failed.
• Base station export drop-down box supports: XML/CSV
• Embedded Integrator reset option via web configurator offers more roles.
• CNIPoverLookup improvement web configurator setting

Base export button setup confusing

For improved interoperability and robustness, ptp operation of V2.57.0 is back to two-step clock synchronisation.

Bug fixes

Web configurator is unusable after "wrong password" in SIP account.

Autolookup in XSI phonebooks: Number is not replaced with the contact name.

Registration lost after maintenance using TLS

• Transport timeout watchdog timer is not reset when 200 response is received after 408
• If RenewConnectionAfterTimeout is triggered, its parameter value can't be changed.

[N-Way] Adding conference participants is not possible when access codes are used.

SIP registration lost on FW 2.53.

After a time all handsets reply with "Busy Here" to incoming calls.

CLIP/COLP option does not show numbers starting with +

MQTT bsStatus response does not contain the name.

• Téléchargements

New functions

Download of DECT measurements files via the web-interface

Improvements

Default production certificate expired – a valid certificate is automatically used.

Do lookup if CNIP contains number only, if CNIP contains a name, this name will be displayed.

If handset import has an error, it should be more descriptive.

Bug-fixes

Inband DTMF over G722 did not work.

Giga_ip_bs terminated when the code for call forwarding was dialled.

• Téléchargements

Improvements

Security

Implementation of DECT Standard Authentication Algorithm 2 (DSAA2).

Mediasec improvement.

Provisioning

Web-interface shows warning when errors in provisioning file

Internal Telephony: Not give an error message if the handset is not available

AML / MQTT

Make error handling more descriptive for AML Message

Notify server that the handset is in/out of charger

Web Interface

Support for Polish language

UDP NAT refresh timer

Various

DNS-SRV failover/fallback improvements

In special cases, the handset can be configured to automatically use a prefix (example "0") if the number to dial exceeds x digits.

Configure Registration Window DM specific

Diversion header in SIP INVITE is supported

Calibrated COMfortel M-730 is supported

Bug-fixes

Incorrect license status for COMfortel WS-500S license upload on licensing page

Wrong license after save/restore config on COMfortel WS-500S with upgrade

Provisioning: set_hs_aml not working with capital letters

DM Call limit problem

If display name of the caller contains the char “ and <, they are not displayed on receiver device

Continued audio after hang-up for some time

SRTP Audio stops after 15 min

• Téléchargements

New Functions

DECT Manager redundancy

If the number of errors increases (base stations log off from the DECT Manager), the redundancy base takes over the DECT Manager role and the system continues to run stable.

Support for MS Teams

WS-500 can connect directly with Microsoft Teams.

• Calling functionality using SIP
• Configuration (auto-provisioning) by the Microsoft Teams platform

Benefits: Users can do the following:

Make/Receive calls: Users can make/receive calls

• PSTN (if available on the Teams platform)
• Teams or Skype for Business users who have SIP devices
• Teams and Skype for Business client applications (answer calls only)

The WS-500 acts as a Teams endpoint. Inbound calls will also be forked to the user’s SIP device

Multiple simultaneous calls

A user in a call can put the call on hold to make or receive other calls. A user can also conference two calls

Do not disturb

A user can set do not disturb on the device so that the device will not ring for incoming calls. This has no impact on the user’s status on all other Teams endpoints

Hold/Resume and Mute/Unmute

A user can hold and resume or mute and unmute a call by using the features for those actions on the device

Voicemail

Users can listen to electronically stored voice messages that callers leave for them

Message waiting indicator

Users can receive notifications that alert them when they have new voicemail messages

Sign-in and sign-out

Users can sign in and sign out of Teams

• Local sign-in/out on the DECT handset via a configured softkey

• Remote sign-in /out by the Teams administrator

DTMF

Users can press number keys to provide input during interactive voice response calls

Teams meetings

A user can join a Teams meeting by dialing the meeting access number

Call transfers

Users can transfer calls. SIP Gateway supports both blind and consultative transfers

Local call forwarding

A user can set forwarding rules (always, on timeout, and busy) for the device

Multiple devices

The user can sign-in on more than one SIP device and Teams client applications

Multiple platforms

The Nx70 system can be connected to Microsoft Teams and parallelly also to other platforms

Requirements

Microsoft

• A license for Phone System (via E5 or a standalone license)
• PSTN enablement (i.e., a phone number) via a Microsoft Teams Calling Plan, Direct Routing, or Operator Connect
• A Common Area Phone license for any common area devices

Auerswald M-Series

• A WS-500S/M with software 2.52 or higher
• An M-5x0 or M-7x0 handset
• No extra licenses are needed

Licence update as an online process

Previously, licences could only be uploaded to the system as a file (via the 'Browse' button). If the PBX has access to the Internet, a direct comparison with the licence server can now be initiated with the 'Refresh' button. This synchronisation runs automatically every 24 hours with a log (date/time) of when the last connection to the server was. This function is also interesting when licences are swapped or disabled.

Waiting time for firmware updates

Until now, the update started immediately. Now a waiting time in steps of 300 seconds can be set via provisioning. If there are active calls, the waiting time starts. If no more calls are active, the update is started.

Improvements

Alarm/location functions

Alarm/location licence can now be managed via the web interface. Until now, the alarm and messaging functions could only be enabled/disabled via provisioning.

Now there is another setting option in the web interface for each handset:

• Licence

The overview of the handsets shows which handsets are currently using the alarm/messaging licences.

The system can inform the Alarm server in case of:

• Single DECT base up/down
• Single DECT manager up/down
• Status of DECT base stations up/down
• Status of DECT managers up/down

Messaging and/or location license is visual in the handset overview via an icon

BLE via MQTT within 20 seconds sends cached values

Timeout in aml message status fullview_by_user_interact

Notification about DECT base and DECT manager status

Extend CLIP/COLP possibilities with PAI(tel)

• FROM
• PPI + FROM
• PAI(sip )+ PPI + FROM
• PAI(tel) + PPI + FROM
• PAI(tel) + FROM + PAI(sip)

Syslog

TLS protocol can be configured via web-interface and not only via auto-provisioning

DECT registration window

Close the DECT registration window on all DMs, if last handset has moved from in-Registration to Registered

Support

log information about changes made by de user/provisioning in the one-button diagnostic file

Consultation-Softkey

(to put call on hold and start consultation call) should not disappear in passive hold

Central Phonebook

• Do not show empty entries
• Download via https

Security

Disable unsecure TLS1.1

Licence

• 'Please activate license' after restore settings with an active license to another VI
• Failover Period Active is shown in web-interface

CNIP with special characters is displayed incorrectly on consultation call display

Provisioning

Templates with more handsets then supported should not give errorencrypted provisioning file support

Web-interface

Status of last Automatic backup

CCBS - Ringback

via 486 Busy

SIP re-registration

expected at ..% of expire timer

Reboot

via SIP NOTIFY Event: check-sync;reboot=true

Option for priority of SIP name over net/central-dir-autolookup

CCBS and CCNR should by config-option be made available for SIP servers indicating ccbs/ccnr support by different measures

TTL time

can be adjusted to 128

Send DTMF tone during call waiting signaling

Status of last Automatic backup listed in WebUI

Name in XSI phonebook is not displayed properly in incoming calls

SIP account does not register after employee change

WS-500M behind IBERNEX "nurse call" system - CLIP/CNIP is not displayed in incoming calls, 'External' instead

DNS SRV/A queries

TTL not applied

Device cannot start an upgrade/downgrade process if there is an active call

Busy display

removing useless softkey 'Options' as it does nothing at 'Busy' display

Bug-fixes

Selection from the bug fixes in this release:

If Registrar/Proxy is given by FQDN, Failover-Server function does not work

Sporadic no audio when using TLS and SRTP in a multicell environment

LAN synchronisation: ptp reload and so asynchrony triggered by too sensitive check for DHCP changes

WS-500S auto-answer call info after=0, also if Call Manager set to NO!

RFC2833 DTMF does not work

Name in XSI phonebook is not displayed properly in incoming calls

WS-500M stopped sip registration after some weeks

Enabling/Disabling VLAN via provisioning makes the LAN interface go down

RPID info in UPDATE is not displayed on handset after attended transfer

INVITE with replaces header is not answered with 200OK

LDAP

• LDAP client is not able to properly close the session when there are some errors during parsing of the LDAP filters configured for LDAP requests
• Validate syntax for filters

• Téléchargements

What is new?

• Add new MQTT connection Method

Improvements

• Introduce sip.instance and reg-id according to rfc5626
• Broadsoft XSI phonebooks, lookup in multiple XSI phonebooks:
• Update PJSIP library to version 2.11.1
• Messaging:
• Improve performance of deleting messages in msg-service via delMsg procedure
• Blue color AML texts and icons support
• TLS 1.3 support
• Warn about SIP messages too long for UDP transport
• Show longer internal names on COMfortel M-710 / COMfortel M-720 / COMfortel M-730 handsets
• Create web page for automatic backup
• Fallback from failover honoring a penalty time
• AML inventory/status report: base stations and DECT managers - connectivity and synchronization
• Show in the UI and Logs reason for not registering SIP
• Show in syslog when license is applied for wrong master DM

Bugfixes

• COMfortel WS-500M loses the SIP registration until the next restart
• Some mobile devices are no longer registered after a network down
• Registration after receive 503 with Retry-After
• COMfortel WS-500M with V2.44 - VI licenses no longer work
• Minor memory leak when performing LDAP tests
• Failed registration retry timer not respected due to SIP registration monitoring
• MWI after "Call completed elsewhere"
• Phonebook Italian translation for "Refine"
• DTMF not work if 103 telephone-event/48000 is send in "INVITE"
• COMfortel WS-500S restart sporadically.
• Trying and Ringing send with codec mismatch
• License:
  • Missing MAC address of Master DM in MAC-ID and not possible to upload license file for Master DM
  • Invalid license status: Activation Period -1 d for some variants
• Messaging:
  • Second paragraph in message is not displayed in detailed view
  • Title not displaying in detailed view
• LDAP:
  • Incorrect search request and sporadic giga-ip-bs crash during specific LDAP search
  • Heal TLS LDAP session pending too long
• License:
  • Unexpected change of license status from "License activated" to "Failover period active" after changing SIP provider settings and reboot.

Known Issues

• Collision of DM roam-out vs message-call could create a phantom message for any other handset later roaming in into this DM's handset slot.

• Téléchargements

What is new?

• Per default one Messaging and Location License is enabled
• Show AML licenses on License page
• Application server, secure connection using certificates
• User settings like silencing can be overruled via MQTT
• Vibration can be activated via MQTT
• Message ringtone volume can be set via MQTT
• Text with line break can be send
• Option to allow user to delete the message can be set to yes or no via MQTT
• Auto-provisioning: Set TTL value for IPv4 for INT-DM roles
• Auto-provisioning: NTP server via DHCP option 42
• Auto-provisioning: DNS option 6 DNS server
• Central phonebook:
     o Sort on first name / last name or Last name / first name

Improvements

• The handset can not connect for a short period, show "No base"
• SUOTA pull
• isable central phonebook for large installations

Bugfixes

• Fix registration problems with >1 Contact headers
• Add support for SIP-OPTIONS sent during INVITE dialog
• ptime value is not sent in outgoing calls
• System restarts, sporadic giga-ip-bs termination
• DECT system loses registration on PBX after approx. 3 months
• N670 restart sporadically
• LDAP improvements
• In dialog Re-Invite is not answered with all codecs in SDP
• Calls can't be set up from time to time (603 decline)
• XML phonebook: HS displays "empty line"

• Téléchargements

What is new?

• Alarming, messaging and location
• SIP messaging • Messaging and location license
• NAT refresh timer
• TLS 1.3 first implementation for provisioning / LDAPS / MQTT

Improvements

• Russian/Dutch translations
• Provide feedback when DM statistics are not available
• DST Root CA X3 certificate expires in less than 180 days (2021-09-30)
• Improve syslog to show why license was rejected

Bugfixes

• Re-invite is not answered with all codecs in SDP
• Statistics not retrieved - Operation Failed and other WEB UI pages not shown
• Web-interface, system is shown as "small" instead of "medium" • Incorrect display in the statistics "Operation failed"
• Statistics Reset all doesn't include LAN counters
• After update with expansion to 20 providers, 1 missing 19 shown
• System reboots when trying to access LDAP contacts
• Crash after incoming calls from certain mobile phone provider
• Base Restarts when wants to hear VoiceMail
• Performance problem with BS synchronisation page
• DECT not responsive after Network voice mail pressed simultaneously from 2 DECT devices

• Téléchargements

What is new?

• COMfortel WS-500S can be configured as a Mini-multicell solution
• COMfortel WS-500S can be used as a DECT Base in a multicell system (after purchase of an upgrade license to the WS-500M feature level)
• Implementation of 'mediasec' support
• Provisioning of network settings

Improvements

• uaCSTA improvements
• Tone scheme "Greece" can be selected
• Delete handset does not work when capital letters are used for IPUI
• Use xHTML phonebook for call transfer > works not with the prov xHTML phonebook Key
• Blind-transfer can be disabled

Bugfixes

• Change system from Small to Medium then error message is shown
• Wrong MWI indication caused by platform NOTIFY broadcasts
• CNIP with special characters doesn't display correctly
• Outgoing call with letters in SIP from user part is not stored
• Incoming call with letters in SIP From user part is not stored with URI to call back
• CNIP is not displayed on HS if it contains "@" character

• Téléchargements